Tile floors are loved by everyone for their beauty and durability. But over time, dust and stains will quietly accumulate, making the floor dull. Are you also troubled by the cleaning problem of stubborn stains and grout? Don’t worry, this article will reveal a set of simple methods to help you easily clean tile floors.
![](https://arielguide.com/wp-content/uploads/2024/06/81j84uCoREL._AC_SL1500_-1024x1024.jpg)
Image From Amazon
Step 1: Use a vacuum cleaner or broom to thoroughly clean the floor. Make sure that the dust and other small particles on the surface are cleaned up. This will improve the effectiveness of subsequent cleaning work.
![](https://arielguide.com/wp-content/uploads/2024/06/Bonneville-12_-x-12_-x-0_06mm-Luxury-Vinyl-Tile.jpg)
Image From wayfair.com
Step2: It is crucial to choose the right mop and cleaning agent. We recommend using a flat mop or rag instead of a sponge mop. Because the latter tends to push dirt into the grout, which is not conducive to deep cleaning.
For cleaning agents, you can choose a simple and effective homemade cleaning agent: vinegar and water. Mix vinegar and water in a ratio of 3:1. It can not only effectively remove dirt, but also play a role in sterilization and disinfection.
![](https://arielguide.com/wp-content/uploads/2024/06/Modern-Entryway-With-Limestone-Floor-Tiles.jpg)
Image From soulandlane.com
Step 3: Pour the prepared vinegar-water solution into a spray bottle and spray it on the floor surface. Then wipe it with a flat mop or rag. After cleaning one area, move to the next one. Mop from the inside to the outside to avoid leaving footprints or stains in the area that has been cleaned.
![](https://arielguide.com/wp-content/uploads/2024/06/20-smukke-countrykokkener.jpg)
Image From isabellas.dk
Step 4: Grout is often the hardest hit area for dirt and mold accumulation, so it needs special cleaning. Use a grout cleaner with oxygen bleach rather than chlorine bleach to protect the tile from damage. Spray the cleaner on the grout and let it sit for a few minutes. Scrub it with an old toothbrush and then rinse it with clean water.
![](https://arielguide.com/wp-content/uploads/2024/06/Stone-Effect-Tiles-_-Flooring-Walls-_-Quorn-Stone.jpg)
Image From mystonefloor.com
Step 5: For stubborn stains, you can use hot water, dishwashing liquid, or hydrogen peroxide. Mix hot water and dishwashing liquid and rub it on the stain with a rag. If the stain is still difficult to remove, you can try using hydrogen peroxide. Spray it on the stain and let it sit for a while before wiping it.
![](https://arielguide.com/wp-content/uploads/2024/06/The-7-Prettiest-Kitchen-Floor-Tile-Ideas-Weve-Seen-This-Year-So-Far-_-Hunker.jpg)
Image From hunker.com
Step 6: After cleaning, wipe the floor thoroughly with a dry mop or towel.
How to clean special tiles?
![](https://arielguide.com/wp-content/uploads/2024/06/91-Cg0TDzeL._AC_SL1500_-1024x989.jpg)
Image From Amazon
Marble, granite and slate are special materials. We recommend using a pH-neutral detergent or mild floor cleaner. Using acidic or alkaline detergents can easily damage the surface, affecting its gloss and texture. Dilute the neutral detergent in proportion and gently wipe the surface with a rag. Rinse with clean water and dry thoroughly.
How often should you clean your tile floors?
It is recommended to vacuum once a week and wet clean once a month. You can increase the cleaning frequency appropriately according to the actual situation. At the same time, check the grout regularly and deal with any mold or stains found in time.
Learn More : How To Clean Copper Pots So They Shine Like New